Fairbanks Morse Z 1 1/2hp

Discussion in 'For Sale' started by Glenreed, Mar 10, 2019.

  1. Glenreed

    Glenreed Member

    I have for sale a nice little 1 1/2hp Z mounted on new hardwood skids with new fuel tank, bore has been honed and new rings gapped and fitted, also new head gasket. Shims left in main bearings but none in the big end. I have a new white metal bearing that will go with the engine.
    Fitted with good bosch flick mag and starts easy.
    comes with starting handle although not needed.
    The inlet valve guide had been damaged in the past but is held in place securely by the valve spring, you probably wouldn't notice unless you disassembled it.
    It has a incorrect silencer fitted but it does the job.
    Original looking engine with a little paint left on.
    looking for £700 may consider swap px ?
    UNADJUSTEDNONRAW_thumb_5e0e.jpg
     

Share This Page